Phoenix Contact · Modem
2313643 is a Phoenix Contact industrial component with Supply voltage 18 V DC ... 30 V DC; Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage18 V DC ... 30 V DC
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
Specifications
| Electrical |
| Supply voltage |
18 V DC ... 30 V DC |
| Rated torque |
0.56 Nm ... 0.79 Nm |
| Rated speed |
10/100 Mbps, auto negotiation |
| I/O and communication |
| Protocols |
Transparent protocol for IPv4 and IPv6 |
| Mechanical |
| Weight |
259.7 g |
| Mounting |
DIN rail / panel |
| Terminal type |
14 |
| Terminal wire size |
2.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
10 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Modem specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Modem variants |
| Catalog number |
Mounting |
|
2313643 (this page) |
DIN rail / panel |
| 2313067 |
DIN rail / panel |
| 2313096 |
DIN rail / panel |
| 2313423 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2313643 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above â 18 V DC ... 30 V DC â and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2313643
Phoenix Contact 2313643 â Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2313643; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Terminal type: 14 â Match it to the existing panel and upstream protection.
- Rated speed: 10/100 Mbps, auto negotiation â Record it with the other nameplate data when sourcing a replacement.
- Mounting: DIN rail / panel â Confirm the revision of the installed unit before a like-for-like replacement.
- Protocols: Transparent protocol for IPv4 and IPv6 â Use it as the reference when cross-checking a current-production equivalent.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 2313643
Q.Which value is published under weight for catalog number 2313643?
For 2313643, weight is given as 259.7 g. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 2313643, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.Where can I find the terminal wire size data for 2313643?
It is listed in the specification table for Phoenix Contact 2313643 as 2.5 mm². Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of 2313643 before ordering?
Match the catalog number 2313643 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 2313643 replace the unit currently installed in my panel?
Compare catalog number 2313643 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.