Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Signal Conditioner
2308098 is a Phoenix Contact variable-frequency drive with Overload capacity 3 x I IN; Enclosure rating IP20 (IEC 60529); Frequency 20 Hz ... 6000 Hz (0 Hz). It is used in pump sets, conveyor belts, fan and compressor drives where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated current Ie | 600 A |
|---|---|
| Rated insulation voltage Ui | 300 V AC |
| Tripping characteristic | 10 mm |
| Power consumption | 1.65 W |
| Frequency | 20 Hz ... 6000 Hz (0 Hz) |
| Overload capacity | 3 x I IN |
| I/O and communication | |
| Response time | 150 ms |
| Mechanical | |
| Weight | 291.7 g |
| Mounting | DIN rail / panel |
| Terminal wire size | 0.25 mm² ... 2.5 mm² |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
Values follow the Phoenix Contact Signal Conditioner specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Signal Conditioner variants | |||
| Catalog number | Overload capacity | Frequency | |
|---|---|---|---|
| 2308098 (this page) | 3 x I IN | 20 Hz ... 6000 Hz (0 Hz) | |
| 2308027 | 6 x I IN | 20 Hz ... 6000 Hz (0 Hz) | |
| 2308030 | 3 x I IN | 20 Hz ... 6000 Hz (0 Hz) | |
| 2308085 | 3.6 x I IN | 20 Hz ... 6000 Hz (0 Hz) | |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2308098 is the device-level element in a Phoenix Contact variable-frequency drive installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the 600 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in pump sets, conveyor belts, fan and compressor drives, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2308098 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2308098; verify the catalog number against your bill of materials before requesting a quotation.
Cross-check the ratings above with the installed device before confirming the order.
Q.Where can I find the rated current Ie data for 2308098?
It is listed in the specification table for Phoenix Contact 2308098 as 600 A. Confirm this figure against the unit currently in the panel.
Q.For 2308098, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Phoenix Contact 2308098. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under frequency for catalog number 2308098?
For 2308098, frequency is given as 20 Hz ... 6000 Hz (0 Hz). Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 2308098?
Send the full catalog number 2308098, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2308098.
Q.How do I confirm compatibility of 2308098 before ordering?
Match the catalog number 2308098 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
