Phoenix Contact · Connection Cable
2305237 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| I/O and communication |
| Flame detection |
IEC 60332-1-2 (raw cable) |
| Mechanical |
| Weight |
335 g |
| Terminal wire size |
Round cable set |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Degree of protection |
≥ IP54 (Installation location) |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
2305237 (this page) |
up to 4 A |
| 2305253 |
up to 4 A |
| 2305279 |
up to 4 A |
| 2305305 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2305237 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2305237
Phoenix Contact 2305237 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2305237; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Weight: 335 g — Record it with the other nameplate data when sourcing a replacement.
- Terminal wire size: Round cable set — Confirm the revision of the installed unit before a like-for-like replacement.
- Flame detection: IEC 60332-1-2 (raw cable) — Use it as the reference when cross-checking a current-production equivalent.
- Enclosure rating: IP67 (IEC 60529) — Verify it in the project documentation before confirming the order.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 2305237
Q.For 2305237, what does the specification table state about degree of protection?
The specification table lists degree of protection = ≥ IP54 (Installation location) for Phoenix Contact 2305237. Confirm this figure against the unit currently in the panel.
Q.Which value is published under terminal wire size for catalog number 2305237?
For 2305237, terminal wire size is given as Round cable set. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 2305237, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 2305237 before ordering?
Match the catalog number 2305237 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 2305237?
Send the full catalog number 2305237, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2305237.