Phoenix Contact · Connection Cable
2289081 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| I/O and communication |
| Flame detection |
IEC 60332-1-2 (raw cable) |
| Mechanical |
| Weight |
248 g |
| Terminal wire size |
Round cable set |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Degree of protection |
≥ IP54 (Installation location) |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
2289081 (this page) |
up to 4 A |
| 2289010 |
up to 4 A |
| 2289036 |
up to 4 A |
| 2289052 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2289081 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2289081
Phoenix Contact 2289081 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2289081; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Rated current Ie: up to 4 A — Confirm the revision of the installed unit before a like-for-like replacement.
- Flame detection: IEC 60332-1-2 (raw cable) — Use it as the reference when cross-checking a current-production equivalent.
- Degree of protection: ≥ IP54 (Installation location) — Verify it in the project documentation before confirming the order.
- Weight: 248 g — Check this value against the nameplate of the installed unit before ordering.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 2289081
Q.Where can I find the rated current Ie data for 2289081?
It is listed in the specification table for Phoenix Contact 2289081 as up to 4 A. Confirm this figure against the unit currently in the panel.
Q.For 2289081, what does the specification table state about flame detection?
The specification table lists flame detection = IEC 60332-1-2 (raw cable) for Phoenix Contact 2289081. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under degree of protection for catalog number 2289081?
For 2289081, degree of protection is given as ≥ IP54 (Installation location). Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 2289081 before ordering?
Match the catalog number 2289081 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for 2289081?
Send the full catalog number 2289081, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2289081.