Phoenix Contact · Connection Cable
2288914 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| I/O and communication |
| Flame detection |
IEC 60332-1-2 (raw cable) |
| Mechanical |
| Weight |
66.3 g |
| Terminal wire size |
Round cable set |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Degree of protection |
≥ IP54 (Installation location) |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
2288914 (this page) |
up to 4 A |
| 2288901 |
up to 4 A |
| 2288927 |
up to 4 A |
| 2288956 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2288914 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2288914
Phoenix Contact 2288914 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2288914; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Terminal wire size: Round cable set — Use it as the reference when cross-checking a current-production equivalent.
- Degree of protection: ≥ IP54 (Installation location) — Verify it in the project documentation before confirming the order.
- Weight: 66.3 g — Check this value against the nameplate of the installed unit before ordering.
- Rated current Ie: up to 4 A — Match it to the existing panel and upstream protection.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2288914
Q.Before ordering 2288914, which degree of protection entry should be checked?
The degree of protection entry quoted above is ≥ IP54 (Installation location). Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the terminal wire size data for 2288914?
It is listed in the specification table for Phoenix Contact 2288914 as Round cable set. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 2288914, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 2288914. Compare it with the nameplate of the installed unit before ordering.
Q.Can the 2288914 replace the unit currently installed in my panel?
Compare catalog number 2288914 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 2288914 before ordering?
Match the catalog number 2288914 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.