Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Power Meter
2277064 is a Phoenix Contact industrial component with Rated current Ie 0 A AC ... 100 A AC; Supply voltage 100...240 V AC / 24 V DC; Enclosure rating IP20 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated current Ie | 0 A AC ... 100 A AC |
|---|---|
| Tripping characteristic | 10 mm |
| Rated power kW | 2.5 VA |
| Supply voltage | 100...240 V AC / 24 V DC |
| Frequency | 50 Hz |
| Rated torque | 2 Nm ... 2 Nm |
| Mechanical | |
| Weight | 314 g |
| Mounting | DIN rail / panel |
| Terminal wire size | 1.5 mm² ... 10 mm² (per secondary terminal) |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
| Humidity | Use only indoors, non-condensing |
Values follow the Phoenix Contact Power Meter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Power Meter variants | |||
| Catalog number | Rated current Ie | Mounting | |
|---|---|---|---|
| 2277064 (this page) | 0 A AC ... 100 A AC | DIN rail / panel | |
| 2277019 | 0 A AC ... 50 A AC | DIN rail / panel | |
| 2277035 | 0 A AC ... 150 A AC | DIN rail / panel | |
| 2277116 | 0 A AC ... 250 A AC | DIN rail / panel | |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 2277064 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 100...240 V AC / 24 V DC — and switches or conditions the load within the 0 A AC ... 100 A AC ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 2277064 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2277064; verify the catalog number against your bill of materials before requesting a quotation.
Available from stock with datasheet, certificates and a quotation on request.
Q.For 2277064, what does the specification table state about supply voltage?
The specification table lists supply voltage = 100...240 V AC / 24 V DC for Phoenix Contact 2277064. Confirm this figure against the unit currently in the panel.
Q.Which value is published under humidity for catalog number 2277064?
For 2277064, humidity is given as Use only indoors, non-condensing. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 2277064, which rated torque entry should be checked?
The rated torque entry quoted above is 2 Nm ... 2 Nm. Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 2277064 replace the unit currently installed in my panel?
Compare catalog number 2277064 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 2277064?
Send the full catalog number 2277064, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2277064.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
