Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Terminal Block
1757116 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Tripping characteristic 7 mm; Rated operational voltage 800 V (IEC 60947-7-1). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated current Ie | up to 41 A (IEC 60947-7-1) |
|---|---|
| Rated operational voltage | 800 V (IEC 60947-7-1) |
| Rated insulation voltage Ui | 250 V |
| Rated impulse withstand Uimp | 4.8 kV |
| Breaking capacity Icu/Ics | hot-dip tin-plated |
| Tripping characteristic | 7 mm |
| Frequency | 2.21 kV |
| Rated torque | 0.5 Nm ... 0.6 Nm |
| Rated speed | 1 octave/min |
| Mechanical | |
| Weight | 20.84 g |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Terminal type | Tin (5 µm - 7 µm Sn) |
| Terminal wire size | 0 ° |
| Environment and compliance | |
| Operating temperature | -40 °C ... 70 °C |
| Certifications | CE, UL, cULus |
| Humidity | 30 % ... 70 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Terminal Block variants | |||
| Catalog number | Tripping characteristic | Breaking capacity Icu/Ics | Rated operational voltage |
|---|---|---|---|
| 1757116 (this page) | 7 mm | hot-dip tin-plated | 800 V (IEC 60947-7-1) |
| 1757145 | 7 mm | hot-dip tin-plated | 800 V (IEC 60947-7-1) |
| 1757187 | 7 mm | hot-dip tin-plated | 800 V (IEC 60947-7-1) |
| 1757019 | 7 mm | hot-dip tin-plated | 800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 1757116 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 1757116 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1757116; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Q.For 1757116, what does the specification table state about terminal wire size?
The specification table lists terminal wire size = 0 ° for Phoenix Contact 1757116. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under breaking capacity Icu/Ics for catalog number 1757116?
For 1757116, breaking capacity Icu/Ics is given as hot-dip tin-plated. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 1757116, which terminal type entry should be checked?
The terminal type entry quoted above is Tin (5 µm - 7 µm Sn). Confirm this figure against the unit currently in the panel.
Q.Can the 1757116 replace the unit currently installed in my panel?
Compare catalog number 1757116 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1757116?
Send the full catalog number 1757116, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1757116.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
