Phoenix Contact 2959573 UM 25-D 9SUB/S/FRONT/Q - Termination board

SKU: 2959573
Regular price $87.68
In stock (80 units)
Condition
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Terminal Block

2959573 is a Phoenix Contact terminal block with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Operating temperature -20 °C ... 50 °C. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Rated current Ieup to 41 A (IEC 60947-7-1)
  • Rated operational voltage800 V (IEC 60947-7-1)
  • Operating temperature-20 °C ... 50 °C
  • Mounting35 mm DIN rail (IEC 60715)

Specifications

Electrical
Rated current Ie up to 41 A (IEC 60947-7-1)
Rated operational voltage 800 V (IEC 60947-7-1)
Rated insulation voltage Ui 125 V
Tripping characteristic 9 mm
Rated torque 0.4 Nm ... 0.5 Nm
Mechanical
Weight 112 g
Mounting 35 mm DIN rail (IEC 60715)
Terminal wire size 0.2 mm² ... 2.5 mm²
Environment and compliance
Operating temperature -20 °C ... 50 °C
Certifications CE, UL, cULus

Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Terminal Block variants
Catalog number Mounting Rated current Ie Rated operational voltage
2959573 (this page) 35 mm DIN rail (IEC 60715) up to 41 A (IEC 60947-7-1) 800 V (IEC 60947-7-1)
2959638 35 mm DIN rail (IEC 60715) up to 41 A (IEC 60947-7-1) 800 V (IEC 60947-7-1)
2900676 DIN rail / panel up to 41 A (IEC 60947-7-1) 800 V (IEC 60947-7-1)
2900701 DIN rail / panel up to 41 A (IEC 60947-7-1) 800 V (IEC 60947-7-1)

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 2959573 is the device-level element in a Phoenix Contact terminal block installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 2959573

Phoenix Contact 2959573 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2959573; always cross-check the catalog number and hardware revision on the nameplate before placing an order.

  • Rated torque: 0.4 Nm ... 0.5 Nm — Verify it in the project documentation before confirming the order.
  • Rated insulation voltage Ui: 125 V — Check this value against the nameplate of the installed unit before ordering.
  • Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
  • Tripping characteristic: 9 mm — Record it with the other nameplate data when sourcing a replacement.

Available from stock with datasheet, certificates and a quotation on request.

Common questions about 2959573

Q.Where can I find the rated operational voltage data for 2959573?

It is listed in the specification table for Phoenix Contact 2959573 as 800 V (IEC 60947-7-1). Use the value as the reference when sourcing a current-production equivalent.

Q.For 2959573, what does the specification table state about rated insulation voltage Ui?

The specification table lists rated insulation voltage Ui = 125 V for Phoenix Contact 2959573. Check the revision of the installed unit if the catalog number has been superseded.

Q.Which value is published under rated current Ie for catalog number 2959573?

For 2959573, rated current Ie is given as up to 41 A (IEC 60947-7-1). Compare it with the nameplate of the installed unit before ordering.

Q.What should I include in an enquiry for 2959573?

Send the full catalog number 2959573, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2959573.

Q.Can the 2959573 replace the unit currently installed in my panel?

Compare catalog number 2959573 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!