Phoenix Contact · Switch
2832085 – FL SWITCH 5TX · Switch
The Phoenix Contact 2832085 (FL SWITCH 5TX) is a Switch in the Phoenix Contact range. The specification below is transcribed from the official Phoenix Contact product page for this order number, which publishes the technical data in 12 sections: Dimensions, Material specifications, Mounting, Interfaces, Output data, Product properties and further sections.
Nominal voltage24 VÂ DC
Degree of protectionIP20
Ambient temperature0 °C ... 55 °C
Dimensions45 mm
ConnectionRJ45
MaterialPA 6.6
How it works
Phoenix Contact keeps the values in the groups shown below, in the order the manufacturer publishes them: Dimensions, Material specifications, Mounting, Interfaces, Output data, Product properties, Electrical properties, Connection data, Environmental and real-life conditions, Standards and regulations, EMC data, Signaling. The values are carried over unchanged from the official product page; nothing is added beyond what the manufacturer states for this order number.
Specifications
Dimensions
Width45 mm
Height99 mm
Depth112 mm
Material specifications
Colorgreen
Housing materialPA 6.6
Mounting
Mounting typeDIN rail mounting
Interfaces
Ethernet
Connection methodRJ45
Transmission speed10/100 Mbps
Transmission physicsEthernet in RJ45 twisted pair
Transmission length100 m (per segment)
Signal LEDsData receive, link status
No. of channels5
Potential-free signaling contact
Connection methodPlug-in/screw connection via COMBICON
Output data
Signal contact
Control voltage24 VÂ DC (typical)
Control current100 mA (typical)
Product properties
Product typeSwitch
TypeStand-alone
Insulation characteristics
Protection classIII (IECÂ 61140, ENÂ 61140, VDEÂ 0140-1)
Switch functions
Signal contact control voltage24 VÂ DC (typical)
Signal contact control current100 mA (typical)
Status and diagnostic indicatorsLEDs: U S1 , U S2 (redundant voltage supply), link and activity per port
Basic functionsUnmanaged switch / auto negotiation, complies with IEEE 802.3, store and forward switching mode
Additional functionsAutonegotiation
Electrical properties
Local diagnosticsUS1, US2 Supply voltage US1, US2 Green LED
ValueOne LED per port Link active Green LED
ValueOne LED per port Telegrams received Yellow LED
Maximum power dissipation for nominal condition3 W
Test section500 VÂ DC 1 min
Transmission mediumCopper
Supply
Supply voltage24 VÂ DC
Supply voltage range18.5 VÂ DC ... 30.2 VÂ DC
Power supply connectionVia COMBICON, max. conductor cross-section 2.5 mm²
Residual ripple3.6 V PP (within the permitted voltage range)
Typical current consumption125 mA (to U S )
Ground connectionVia DIN rail and/or COMBICON (optional)
Connection data
Connection methodRJ45, shielded
Environmental and real-life conditions
Ambient conditions
Degree of protectionIP20
Ambient temperature (operation)0 °C ... 55 °C
Ambient temperature (storage/transport)-20 °C ... 70 °C
Permissible humidity (operation)30 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)30 % ... 95 % (non-condensing)
Vibration (operation)in acc. with IECÂ 60068-2-6: 5g, 150Â Hz
Resistance to gases that may endanger the functions, in acc. with DIN 40046-36, DIN 40046-37Sulfur dioxide (SO 2 ) 10 ±0.3 cm 3 /m 3 , hydrogen sulfide (H 2 S) 1 ±0.3 cm 3 /m 3 , at 25°C and 75% humidity and exposure of four days
Standards and regulations
Free from substances that could impair the application of coatingIn acc. with VW specification
EMC data
Electromagnetic compatibilityConformance with EMC directive 89/336/EC
Conformance with EMC directivesIECÂ 61000-6-2 IEC 61000-4-2 (ESD) Criterion B
ValueIECÂ 61000-6-2 IEC 61000-4-3 (immunity to radiated interference) Criterion A
ValueIECÂ 61000-6-2 IEC 61000-4-4 (burst) Criterion A
ValueIECÂ 61000-6-2 IEC 61000-4-5 (surge) Criterion A
ValueIECÂ 61000-6-2 IEC 61000-4-6 (immunity to conducted interference) Criterion A
ValueIECÂ 61000-6-2 IEC 61000-4-8 (immunity to magnetic fields) Criterion A
ValueIECÂ 61000-6-2 EN 55022 (emitted interference) Criterion A
Noise immunityEN 61000-6-2:2005
Noise emission
Standards/regulationsEN 61000-6-4
Signaling
Status displayLEDs: U S1 , U S2 (redundant voltage supply), link and activity per port
Order number
2832085 — https://www.phoenixcontact.com/en-us/products/switch-fl-switch-5tx-2832085
Official source
Phoenix Contact official product page, technical data section (EN-US); order number 2832085.
FAQ
What voltage does the 2832085 operate at?
Phoenix Contact gives a nominal voltage of 24 VÂ DC for this order number.
What degree of protection does the 2832085 have?
It is rated IP20, as stated in the official technical data.
What ambient temperature is permitted?
Phoenix Contact specifies an ambient temperature of 0 °C ... 55 °C.
What are the dimensions?
The technical data gives 45 mm.
How is the 2832085 connected?
Phoenix Contact specifies the connection as RJ45.
What material is the housing made of?
The technical data lists PA 6.6.
Shipping & support. Stock is held in Shanghai and dispatched worldwide with the manufacturer's documentation. Contact us for the current lead time, price and freight before ordering.