Phoenix Contact · I/O component
2701815 – AXL F BK PN · I/O component
The Phoenix Contact 2701815 (AXL F BK PN) is an I/O component in the Phoenix Contact range. The specification below is transcribed from the official Phoenix Contact product page for this order number, which publishes the technical data in 11 sections: Dimensions, Notes, Mounting, Material specifications, Interfaces, System properties and further sections.
Nominal voltage24 V DC
Degree of protectionIP20
Ambient temperature-40 °C ... 85 °C
Dimensions45 mm
ConnectionRJ45 jack
Materialgray (RAL 7042)
How it works
Phoenix Contact keeps the values in the groups shown below, in the order the manufacturer publishes them: Dimensions, Notes, Mounting, Material specifications, Interfaces, System properties, Product properties, Electrical properties, Connection data, Environmental and real-life conditions, Standards and regulations. The values are carried over unchanged from the official product page; nothing is added beyond what the manufacturer states for this order number.
Specifications
Dimensions
Width45 mm
Height126.1 mm
Depth74 mm
Note on dimensionsThe depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).
Notes
Note on application
Note on applicationOnly for industrial use
Mounting
Mounting typeDIN rail mounting
Mounting positionany (observe temperature derating)
Material specifications
Color (Housing)gray (RAL 7042)
Interfaces
Supported protocolsPROFINET
ValueTFTP
ValuePTCP
ValueLLDP
ValueSNMP
ValueMRP
ValueDCP
ValueDDI
ValueBootP (BootP only to perform firmware updates)
PROFINET
Number of interfaces2
Connection methodRJ45 jack
Note on the connection methodAuto negotiation and autocrossing
Transmission speed100 Mbps (full duplex)
Transmission physicsEthernet in RJ45 twisted pair
Axioline F local bus
Number of interfaces1
Connection methodBus base module
Transmission speed100 Mbps
Service
Number of interfaces1
Connection methodMicro USB type B
System properties
System limits
Amount of process data (Input data)max. 262 Byte
Amount of process data (Output data)max. 262 Byte
Number of supported devicesmax. 63 (per station)
Number of local bus devices that can be connectedmax. 63
PROFINET
Device functionPROFINET device
SpecificationVersion 2.2
Conformance ClassConformance Class C
Device ID1000 hex
Vendor ID00B0 hex
Programming data
Register length (master)1484 Byte
Product properties
Product typeI/O component
Product familyAxioline F
Typeblock modular
Mounting positionany (observe temperature derating)
Scope of supplyincluding bus base module and Axioline F connector
Insulation characteristics
Overvoltage categoryII (IEC 60664-1, EN 60664-1)
Pollution degree2 (IEC 60664-1, EN 60664-1)
Electrical properties
Maximum power dissipation for nominal condition3.7 W
Potentials: Communications power U L feed-in (the supply of the Axioline F local bus U Bus is generated from U L )
Supply voltage24 V DC
Supply voltage range19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current drawmax. 570 mA (2.0 A on U Bus , U L = 24 V)
Current consumptiontyp. 105 mA (without I/O modules, U L = 24 V)
Protective circuitSurge protection; electronic
ValueReverse polarity protection; electronic
Potentials: Axioline F local bus supply (U Bus )
Supply voltage5 V DC (via bus base module)
Power supply unitmax. 2 A
Electrical isolation/isolation of the voltage ranges
Test voltage: PROFINET interface 1 / PROFINET interface 21500 V AC, 50 Hz, 1 min
Test voltage: PROFINET interface 1 / 24 V communications voltage (U L ) feed-in1500 V AC, 50 Hz, 1 min
Test voltage: PROFINET interface 2 / 24 V communications voltage (U L ) feed-in1500 V AC, 50 Hz, 1 min
Test voltage: PROFINET interface 1 / functional ground1500 V AC, 50 Hz, 1 min
Test voltage: PROFINET interface 2 / functional ground1500 V AC, 50 Hz, 1 min
Test voltage: 24 V communications voltage (U L ) feed-in / functional ground500 V AC, 50 Hz, 1 min
Connection data
Connection technology
Connection nameAxioline F connector
Note on the connection methodPlease observe the information provided on conductor cross-sections in the “Axioline F: system and installation” user manual.
Axioline F connector
Connection methodPush-in connection
Note on the connection methodPlease observe the information provided on conductor cross-sections in the “Axioline F: system and installation” user manual.
Conductor cross-section, rigid0.2 mm² ... 1.5 mm²
Conductor cross-section, flexible0.2 mm² ... 1.5 mm²
Conductor cross-section AWG24 ... 16
Stripping length8 mm
Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation)-25 °C ... 60 °C (Mounting position: panel mounting on horizontal DIN rail)
Value-25 °C ... 55 °C (Mounting position: any)
Degree of protectionIP20
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)5 % ... 95 % (non-condensing)
Mechanical test
Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-65g
Shock in accordance with EN 60068-2-27/IEC 60068-2-2730g
Continuous shock in accordance with EN 60068-2-27/IEC 60068-2-2710g
Standards and regulations
Protection classIII (IEC 61140, EN 61140, VDE 0140-1)
Order number
2701815 — https://www.phoenixcontact.com/en-us/products/io-component-axl-f-bk-pn-2701815
Official source
Phoenix Contact official product page, technical data section (EN-US); order number 2701815.
FAQ
What voltage does the 2701815 operate at?
Phoenix Contact gives a nominal voltage of 24 V DC for this order number.
What degree of protection does the 2701815 have?
It is rated IP20, as stated in the official technical data.
What ambient temperature is permitted?
Phoenix Contact specifies an ambient temperature of -40 °C ... 85 °C.
What are the dimensions?
The technical data gives 45 mm.
How is the 2701815 connected?
Phoenix Contact specifies the connection as RJ45 jack.
What material is the housing made of?
The technical data lists gray (RAL 7042).
Shipping & support. Stock is held in Shanghai and dispatched worldwide with the manufacturer's documentation. Contact us for the current lead time, price and freight before ordering.