Phoenix Contact · Remote I/O Module
2701056 is a Phoenix Contact industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Input voltage range |
0 V AC/DC ... 5 V AC/DC |
| Output current |
5 A |
| Frequency |
0.5 Hz |
| I/O and communication |
| Bus interface |
3 (I/O modules) |
| Response time |
20 ms |
| Mechanical |
| Weight |
320.4 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
90 % |
Values follow the Phoenix Contact Remote I/O Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Remote I/O Module variants |
| Catalog number |
Mounting |
|
2701056 (this page) |
35 mm DIN rail (IEC 60715) |
| 2701000 |
35 mm DIN rail (IEC 60715) |
| 2701027 |
35 mm DIN rail (IEC 60715) |
| 2701034 |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2701056 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2701056
Phoenix Contact 2701056 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2701056; record the nameplate data of the unit being replaced before selecting an equivalent.
- Enclosure rating: IP20 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
- Supply voltage: 24 V DC (IEC 61131-2) — Confirm the revision of the installed unit before a like-for-like replacement.
- Frequency: 0.5 Hz — Use it as the reference when cross-checking a current-production equivalent.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Verify it in the project documentation before confirming the order.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 2701056
Q.Before ordering 2701056, which input voltage range entry should be checked?
The input voltage range entry quoted above is 0 V AC/DC ... 5 V AC/DC. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the output current data for 2701056?
It is listed in the specification table for Phoenix Contact 2701056 as 5 A. Confirm this figure against the unit currently in the panel.
Q.For 2701056, what does the specification table state about bus interface?
The specification table lists bus interface = 3 (I/O modules) for Phoenix Contact 2701056. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 2701056?
Send the full catalog number 2701056, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2701056.
Q.How do I confirm compatibility of 2701056 before ordering?
Match the catalog number 2701056 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.