Couldn't load pickup availability
All industrial automation equipment comes complete with standard matching accessories and detailed step-by-step commissioning manuals. Unbox, install and commission your automation projects smoothly with full confidence.
Got questions?
Feel free to get in touch
Ask an expert!
The Keyence KV-XH16EC is a programmable logic controller. It is supplied by SHLY-PLC, an independent industrial-automation distributor: every unit is visually inspected and functionally checked before dispatch, held in ready stock and shipped worldwide for maintenance, spares and retrofit use. Share your application or existing part number and our team will confirm fitment and comparable in-stock alternatives.
Technical parameters compiled from the manufacturer data sheet and reference documentation.
| Technical Specifications | |
| Type Designation | |
| Model | KV-XH16EC |
| Type | Positioning/motion unit |
| Power Supply | |
| Internal current consumption | 160 mA or less |
| Inputs & Outputs | |
| Output format | EtherCAT |
| Synchronization control Input | External reference, instruction coordinates, current coordinates |
| Input filter | Interference prevention function |
| Output display | LINK/ACT, CONNECT, error status |
| Mechanical | |
| Weight | Approx. 190 g |
| Compliance, Approvals & Standards | |
| Appropriated device | Relay: 2112 points (132 channels) ; Data memory: 4 words |
| Teaching | Current coordinate teaching |
| Other | |
| No. of control axes | 16 axes (including virtual axes) |
| Connectable CPU unit | KV-X Series/KV-8000A |
| Max. number of connectable units | 15 |
| Refresh | Automatic refresh, direct refresh, synchronous refresh between units |
| Control mode | Position control, torque control, speed control, I/O control |
| Control period | 125 μs or more |
| Starting time | 125 μs |
| Axis control function execution method | Ladder program, unit program (flow) |
| Unit program capacity | 3 MB (Max. number of blocks: 20000) |
| Max. number of flows | 256 |
| Number of simultaneous activities | No upper limit |
| Flow Internal data Memory | 524288 words |
| Position unit | mm, inch, deg (angle), PLS (number of pulses); Decimal point position from 0 to 9 digits, unit conversion function available |
| Cumulative address | -2147483648 to +2147483647 specification units |
| Positioning control Positioning mode | Absolute value/relative value |
| Interpolation | Linear interpolation, arc interpolation, helical interpolation |
| Acceleration/deceleration curve | Linear, SIN |
| Acceleration/deceleration time | 0 to 65535 ms |
| M-code | 1 to 65000, WITH/AFTER mode |
| Sensor positioning | External input-based switching control from speed to position |
| Special function | Synchronous tracking control, absolute position tracking control |
| Clutch | Select from direct, slide, and follow-up |
| Cam | Resolution: 2048 to 32768, Data points: 4 to 64 (changes according to the resolution) |
| Compensation during operation | Compensation via auxiliary input, phase compensation, and step angle compensation |
| Origin return method | Data set type, dog type (push), dog type (selectable from “with Z phase” or “without Z phase”), ; dog type sizing (selectable from “with Z phase” or “without Z phase”), immediate Z phase, origin sensor and Z phase, ; rising edge of limit switch, ; origin sensor midpoint/rising edge |
| JOG/inching | JOG (high speed/low speed), inching (specifiable pulses) |
| Memory data | Point parameters (each axis), synchronization parameters (each axis), cam data, unit program, servo parameters, ; setting read/write during RUN (with some restrictions) |
| Self-diagnosis function | Diagnosis can be made through hardware errors, various parameter errors, error numbers, and error messages |
| Parameter setting | Parameters can be set from KV STUDIO, ladder programs, and unit programs |
| Data backup | Coordinates: nonvolatile memory backup (unlimited), Parameter settings: flash ROM backup (20000 switches) |
Model variants, options and firmware revisions can affect fitment. Before ordering the Keyence KV-XH16EC programmable logic controller, share your existing part number or project requirements and our team will cross-reference comparable in-stock Keyence units and verify compatibility. This listing is provided by an independent industrial-automation distributor; brand names and part numbers are used for identification only.
A: Each KV-XH16EC is inspected and functionally checked before sale. Contact us for the current stock condition and quantity.
A: In-stock orders placed before 14:00 ship the same business day. Standard worldwide delivery is about 5-8 business days, express shipping is available and orders over $500 ship free.
A: Yes. Share your existing part number or application and our technical team will verify compatibility and provide cross-references to comparable in-stock models.
KV-XH16EC · Technical reference data · Independently supplied by SHLY-PLC
Place your order before 14:00 for earliest possible shipment handover. With round-the-clock transit operated by our partnered global logistics providers, parcels reach most international destinations following routine customs processing. Economy shipping takes 5–8 business days, while express delivery arrives in 5–8 business days, both subject to customs clearance progress.Shipping fees will be charged for all orders under USD 500, and the exact shipping cost will be determined and collected by our logistics carriers. Shipments to remote international regions will incur additional courier surcharges to offset extra cross-border transportation costs.
Factory warranty service is not applicable to this industrial control equipment, and extended warranty packages are not provided for this item.
No reviews yet. Be the first to review this product!
