Couldn't load pickup availability
All industrial automation equipment comes complete with standard matching accessories and detailed step-by-step commissioning manuals. Unbox, install and commission your automation projects smoothly with full confidence.
Got questions?
Feel free to get in touch
Ask an expert!
Wall-mounted industrial drive · official technical specifications · 30 kW / 61 A, 400 V class, Frame size R4
ACS880 - 01 - 061A - 3 [ + options ]
| Common factory options | +E200/+E202 internal EMC filter · +D150 internal brake chopper (option for R5–R9; standard on R1–R4) · +D151 brake resistor · +P940/+P944 flange mounting (IP20 back side) · +Fxxx fieldbus/feedback adapters · +FSO safety functions module · control panel ACS-AP-I / ACS-AP-W (Bluetooth) |
|---|
| Mains supply (U1) | |
|---|---|
| Phases | 3-phase (3~) |
| Input voltage | 380–415 V AC, tolerance +10% / −15% (label: 3~400 V) |
| Input frequency | 50/60 Hz ±5%, max. rate of change 17%/s |
| Nominal input current I1 | ≈ 58 A rms at nominal load |
| Fundamental power factor | cos φ1 = 0.98 |
| Network types | Grounded TN and ungrounded IT systems |
| Built-in components | AC (mains) choke/reactor built in as standard; internal EMC filter by option |
| Protection & wiring | |
|---|---|
| Short-circuit withstand | 65 kA prospective (IEC, with specified fuses); 100 kA rms at ≤600 V (UL/NEC, with UL fuses) |
| IEC fuses | IEC 60269 gG or ultra-rapid aR, 500 V, sized per the Hardware Manual fuse table (100 A class for R4/061A; never exceed ABB's recommended rating; smaller allowed) |
| UL fuses | UL Class T recommended; Class J / CC / CF of same rating also accepted (NEC branch-circuit protection) |
| IEC breaker example | ABB S803S-SCL32-SR / MS165-65 motor-protector combination per Hardware Manual breaker table |
| Power cable (typical) | Symmetrical shielded VFD cable, copper; R4 400 V class typically 3×16 mm² Cu (select per installation conditions, 75 °C min.) |
| Output (U/V/W) | 3-phase symmetrical, 0 … U1 |
|---|---|
| Output frequency | 0–598 Hz standard; 0–120 Hz with du/dt or sine filter; “High speed mode” recommended at ≥120 Hz |
| Motor control | ABB Direct Torque Control (DTC) as standard; scalar control available; default switching frequency 2 kHz, selectable (low-noise mode) with current derating |
| Motor types | Asynchronous AC induction motors, permanent-magnet synchronous motors, AC induction servomotors, ABB synchronous reluctance motors (SynRM) |
| Max. motor cable | 300 m (984 ft) for frames R4–R9; EMC directive compliance guaranteed to 150 m (492 ft) |
| Power loss (heat dissipation) | 907 W at nominal load |
| Cooling / noise | Forced-air cooling, controllable fan, required air flow 200 m³/h; sound pressure 62 dBA; incoming-air temperature sensing; free space 200 mm above/below (IP21), 300 mm for IP55 |
| Continuous chopper power Pbrcont | 22 kW (applies at minimum resistance) |
|---|---|
| Minimum resistor resistance Rmin | 13 Ω — never connect a lower resistance |
| ABB standard resistor | SACE15RE13: R = 13 Ω, single-pulse energy Er = 435 kJ (400 s duty cycle), continuous dissipation Prcont = 2 kW; IP21 metal housing, 365 × 290 × 131 mm, 6.8 kg; built-in thermal switch must be wired to a drive DI |
| Digital inputs | 6 × DI (DI1–DI5 NPN/PNP, DI6 PNP), 24 V logic (“0” < 5 V, “1” > 15 V), Rin 2.0 kΩ, hardware filter 0.04 ms + digital filter up to 8 ms; separate start-interlock input DIIL |
|---|---|
| Digital I/O | 2 × DIO (input/output by parameter); DIO1 configurable as 0–16 kHz frequency input, DIO2 as frequency output |
| Analog inputs | 2 × differential AI, jumper-selectable current −20…20 mA (Rin 100 Ω) or voltage −10…10 V (Rin > 200 kΩ); 11-bit + sign, 0.25 ms sampling, inaccuracy 1% |
| Analog outputs | 2 × AO, 0–20 mA, Rload < 500 Ω, 0–300 Hz, 11-bit + sign, inaccuracy 2% |
|---|---|
| Relay outputs | 3 × RO (RO1, RO2 normally open; RO3 changeover), configurable |
| Auxiliary / references | +24 V DC output (total 4.8 W / 200 mA); ±10 V reference outputs (10 mA max) |
| Built-in links | Drive-to-drive XD2D, RS-485, 8 Mbit/s, max 50 m · embedded fieldbus EFB RS-485 (Modbus RTU), max 50 m · control-panel port with USB · removable memory unit for commissioning/maintenance swap |
| Fieldbus option slots | Optional adapters: PROFINET IO / EtherNet/IP / Modbus TCP / EtherCAT (FENA/FECA/FPNO families), PROFIBUS DP (FPBA), CANopen (FCAN), DeviceNet, EtherNet POWERLINK and more; drive profile CiA402 / PROFIdrive compatible |
|---|---|
| Feedback interfaces | FEN-xx incremental/absolute encoder modules, FSE pulse-encoder interface; resolver via adapter; supports closed-loop DTC speed/torque/position control |
| Functional safety options | FSO-12 / FSO-22 safety functions module (TÜV Nord certified): SS1, SS2, SLS, SMS, SBC, SLP/SP etc.; FPTC thermistor module; optional safe pulse encoder |
| Motor-side filters | du/dt filter option (FOCH) and sine filter option for motor insulation / long-cable protection; external/second-environment EMC filters available |
| Software | ACS880 primary control program (common across the series); optional application programs (crane +N5050, position control +N5700, winder, solar etc.); Drive Composer PC tool; ACS-AP assistant control panel (AP-W with Bluetooth) |
| Architecture | Two-channel STO on XSTO connector (input −3…30 V DC, “1” > 17 V, 30 mA per channel on R1–R7); can be daisy-chained between drives; main I/O stays powered during STO |
|---|---|
| Standards / levels | IEC/EN 61800-5-2 STO · IEC 61508 SIL 3 · EN 62061 SIL CL 3 · EN ISO 13849-1 PL e, Category 3, HFT 1; EMC immunity per IEC 61326-3-1 / IEC 61800-5-2 |
| Quantitative data (R4, 400 V) | SFF > 90% · DC ≥ 90% · CCF 80 · MTTFD 10,442 years · PFH 2.89×10⁻⁹ 1/h · mission time TM 20 years |
| Response times (ZCU) | STO reaction time 1 ms; response 2 ms typical / 10 ms max; channel mismatch fault detection 200 ms |
| Height H1 (with cable entry box, IP21) | 573 mm |
|---|---|
| Height H2 (without cable box) | 490 mm |
| Width W | 203 mm |
| Depth D (IP21, with box) | 274 mm (333 mm IP20 variant) |
| Weight | 18.5 kg IP21 (16.1 kg IP20); packaged ≈ 18.6 kg, net 580 × 203 × 274 mm |
|---|---|
| Degree of protection | IP21 / UL Type 1 standard; IP55 / UL Type 12 option; +P940/+P944 flange mount with IP20/UL Open Type rear |
| Board protection | Conformal-coated circuit boards as standard; corrosion-protection variant +P968 available |
| Mounting | Vertical wall mounting; book-style side-by-side; removable control unit; class I protective, overvoltage category III (IEC 60664-1) |
| Operating air temperature | −15 … +55 °C (+5 … +131 °F), no frost; full ratings to +40 °C; derate 1% / 1 °C from +40 to +55 °C |
|---|---|
| Storage / transport (packaged) | −40 … +70 °C (−40 … +158 °F) |
| Relative humidity | 5–95%, non-condensing (max. 60% in presence of corrosive gases) |
| Altitude | 0–4000 m (13,123 ft); rated to 1000 m, then derate 1 percentage point per 100 m (lower ambient offsets derating) |
| Vibration / shock | EN 60068-2-6: max. 1 mm (5–13.2 Hz) / 7 m·s⁻² operation; ISTA 1A transport vibration (R1–R5) |
| Contamination | Indoor controlled environment, pollution degree 2 (IEC 60664-1); no electrically conductive dust; chemical gases IEC Class C3 / ISA G2 for IP21 |
| Approvals / marks | CE, UKCA, cULus (UL & CSA, valid to 600 V), EAC, RCM; ACS880-01 available with marine type approvals from major classification societies |
|---|---|
| EMC | EN/IEC 61800-3 Category C3 as standard; Category C2 (1st environment) achievable with internal EMC filter option (+E200/+E202) |
| Key standards | EN/IEC 61800-5-1 (safety requirements), EN/IEC 61800-3 (EMC), EN/IEC 61800-5-2 (STO), IEC 61508, EN 62061, EN ISO 13849-1, IEC/EN 60529 (IP), UL 61800-5-1 / CSA C22.2 No.274-17, NEC |
|---|---|
| Integrated protections | Output short-circuit, mains loss/undervoltage/overvoltage, earth fault, motor & drive overtemperature, motor overload (per NEC/IEC 61800-5-1), STO diagnostics, brake chopper/resistor fault supervision |
A: This vfd drive comes with manufacturer warranty. Contact us for specific warranty terms.
A: Orders placed before 14:00 ship same day. Standard delivery: 5-8 business days worldwide. Express available.
A: Yes, ACS880-01-061A-3 is designed for full compatibility with ABB ecosystem. Contact our technical team for integration support.
Place your order before 14:00 for earliest possible shipment handover. With round-the-clock transit operated by our partnered global logistics providers, parcels reach most international destinations following routine customs processing. Economy shipping takes 5–8 business days, while express delivery arrives in 5–8 business days, both subject to customs clearance progress.Shipping fees will be charged for all orders under USD 500, and the exact shipping cost will be determined and collected by our logistics carriers. Shipments to remote international regions will incur additional courier surcharges to offset extra cross-border transportation costs.
Factory warranty service is not applicable to this industrial control equipment, and extended warranty packages are not provided for this item.
No reviews yet. Be the first to review this product!
