SIMATIC DP, interface for ET 200PA SMART with redundancy capability, Timestamping suitable for isochronous mode New features: up to 12 modules can be industrial Slave Initiative for Drive ES and Switch ES Expanded quantity structure for HART auxiliary variables Operation of the 64-channel modules 32 signals / slot +++ Observe compatibility instructions in manual +++
Product Type: Industrial Automation Component
General
| Article number |
6ES7650-8PH00-0AA0 |
General information
| Product type designation |
IM 650-8 PH |
| HW functional status |
01 |
| Firmware version |
V1.0.0 |
| Vendor identification (VendorID) |
81BBh |
Supply voltage
| Rated value (DC) |
24 V |
| external protection for power supply lines (recommendation) |
2,5 A |
Mains buffering
| ● Mains/voltage failure stored energy time |
5 ms |
Input current
| Current consumption, max. |
650 mA |
| Inrush current, typ. |
3 A |
| I²t |
0.1 A²·s |
Output voltage
Output current
| for backplane bus (5 V DC), max. |
1.5 A |
Power loss
Addressing volume
| ● Inputs |
244 byte |
| ● Outputs |
244 byte |
Hardware configuration
| number of modules per DP device interface, max. |
12 |
Time stamp
| Accuracy |
1 ms; 1 ms at up to 8 modules; 10 ms at up to 12 modules |
| Number of message buffers |
15 |
| Messages per message buffer |
20 |
| Number of stampable digital inputs, max. |
128; Max. 128 signals/station; max. 32 signals/slot |
| Time format |
RFC 1119 |
| Time resolution |
0.466 ns |
| Time interval for transmitting the message buffer if a message is present |
1 000 ms |
| Time stamp on signal change |
rising / falling edge as signal entering or exiting |
Interface types
| ● RS 485 |
Yes |
| ● Output current of the interface, max. |
70 mA |
| ● Design of the connection |
9-pin sub D |
RS 485
| ● Transmission rate, max. |
12 Mbit/s |
| ● automatic detection of transmission rate |
Yes |
Protocols
PROFIBUS DP
| ● Number of node addresses, max. |
1 to 125 permitted |
Services
| — SYNC capability |
Yes |
| — FREEZE capability |
Yes |
| — Direct data exchange (slave-to-slave communication) |
Yes; Sender |
Potential separation
| Potential separation exists |
Yes |
Isolation
| Isolation tested with |
Isolation voltage 500 V |
Ambient temperature during operation
| ● horizontal installation, min. |
0 °C |
| ● horizontal installation, max. |
60 °C |
| ● vertical installation, min. |
0 °C |
| ● vertical installation, max. |
40 °C |
Altitude during operation relating to sea level
| ● Installation altitude above sea level, max. |
3 000 m |
Dimensions
| Width |
40 mm |
| Height |
125 mm |
| Depth |
117 mm |
Weights
Classifications
| Version |
Classification |
| eClass |
16 |
| eClass |
14 |
| eClass |
12 |
| eClass |
9.1 |
| eClass |
9 |
| eClass |
8 |
| eClass |
7.1 |
| eClass |
6 |
| ETIM |
10 |
| ETIM |
9 |
| ETIM |
8 |
| ETIM |
7 |
| IDEA |
4 |
| UNSPSC |
15 |
General Product Approval
| EU declaration of conformity |
Yes |
| China RoHS |
Yes |
| Manufacturer Declaration |
Yes |
For use in hazardous locations
| ATEX |
Yes |
| IECEx |
Yes |
| CCC |
Yes |
| last modified: |
6/7/2025 |
Applications
This Industrial Automation Component is designed for industrial automation applications, offering reliable performance and compatibility with Siemens automation systems. Suitable for manufacturing, process control, and building automation environments.
