Siemens 6ES7132-6BH01-2BA0 | Industrial Automation Component
Siemens 6ES7132-6BH01-2BA0 | Industrial Automation Component

Disclaimer: Actual product colors may vary slightly from the images shown due to different monitor settings and lighting conditions during photo shoots.

Siemens

Siemens 6ES7132-6BH01-2BA0 | Industrial Automation Component

SKU: 6ES7132-6BH01-2BA0
(2)
$70.77
-13% $81.39 $70.77
In stock
Usually ships within 24 hours
Condition
Factory pre-tested, ready for instant commissioning！

All industrial automation equipment comes complete with standard matching accessories and detailed step-by-step commissioning manuals. Unbox, install and commission your automation projects smoothly with full confidence.

Free shipping
100% secure payments
Industry leading quality

Got questions?

Feel free to get in touch

Ask an expert!

Email +86 18017464056

SIMATIC ET 200SP, Digital output module, DQ 16x 24V DC/0.5A STANDARD, Source output (PNP,P-switching) Packing unit: 10 pieces, fits to BU-type A0, Colour Code CC00, substitute value output, module diagnostics for: short-circuit to L+ and ground, wire break, supply voltage

Product Type: Industrial Automation Component

General

Article number 6ES7132-6BH01-2BA0

General information

Product type designation DQ 16x24VDC/0.5 ST
HW functional status from FS21
Firmware version V0.0
● FW update possible No
usable BaseUnits BU type A0
Color code for module-specific color-coded label CC00

Product function

● I&M data Yes; I&M0 to I&M3
● Isochronous mode No

Engineering with

● STEP 7 TIA Portal configurable/integrated from version STEP 7 TIA V14 with HSP0222 / integrated as of TIA V15
● STEP 7 configurable/integrated from version V5.5 SP3 with HSP0230 V7.0 / integrated as of V5.6 SP1
● PCS 7 configurable/integrated from version V8.1 SP1
● PROFIBUS from GSD version/GSD revision One GSD file each, Revision 3 and 5 and higher
● PROFINET from GSD version/GSD revision GSDML V2.3

Operating mode

● DQ Yes
● DQ with energy-saving function No
● PWM No
● Oversampling No
● MSO No

Supply voltage

Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes

Input current

Current consumption, max. 30 mA; without load

Output voltage

Rated value (DC) 24 V

Power loss

Power loss, typ. 1 W

Address space per module

● Address space per module, max. 2 byte; + 2 bytes for QI information

Hardware configuration

Automatic encoding Yes
● Mechanical coding element Yes
● Type of mechanical coding element Type A

Selection of BaseUnit for connection variants

● 1-wire connection BU type A0
● 2-wire connection BU type A0 with AUX terminals or potential distributor module
● 3-wire connection BU type A0 with AUX terminals or potential distributor module

Digital outputs

Type of digital output Source output (PNP, current-sourcing)
Number of digital outputs 16
Current-sinking No
Current-sourcing Yes
Digital outputs, parameterizable Yes
output type acc. to IEC 61131, type 0.5 Yes
Short-circuit protection Yes; Electronic
● Response threshold, typ. 1 A; 0.7 to 1.3 A
Open-circuit detection Yes
Limitation of inductive shutdown voltage to Typ. L+ (-50 V)
Controlling a digital input Yes

Switching capacity of the outputs

● with resistive load, max. 0.5 A
● with inductive load, max. 0.5 A
● on lamp load, max. 5 W

Load resistance range

● lower limit 48 Ω
● upper limit 12 kΩ

Output current

● for signal "1" rated value 0.5 A
● for signal "1" permissible range, max. 0.5 A
● for signal "0" residual current, max. 0.1 mA

Output delay with resistive load

● "0" to "1", typ. 50 µs
● "1" to "0", typ. 100 µs

Parallel switching of two outputs

● for uprating No
● for redundant control of a load Yes

Switching frequency

● with resistive load, max. 100 Hz
● with inductive load, max. 0.1 Hz; higher frequencies are possible, see Equipment Manual "Maximum permitted switching frequency of inductive loads"
● on lamp load, max. 10 Hz

Total current of the outputs

● Current per channel, max. 0.5 A
● Current per module, max. 8 A; see Equipment Manual "Derating curve"

horizontal installation

— up to 40 °C, max. 8 A
— up to 50 °C, max. 6 A
— up to 60 °C, max. 4 A

vertical installation

— up to 30 °C, max. 8 A
— up to 40 °C, max. 6 A
— up to 50 °C, max. 4 A

Cable length

● shielded, max. 1 000 m
● unshielded, max. 600 m

Interrupts/diagnostics/status information

Diagnostics function Yes
Substitute values connectable Yes

Alarms

● Diagnostic alarm Yes

Diagnoses

● Monitoring the supply voltage Yes
● Wire break Yes; module-wise
● Short-circuit to ground Yes; module-wise
● Short-circuit to L+ Yes; module-wise
● Group error Yes

Diagnostics indication LED

● Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED
● Channel status display Yes; green LED
● for channel diagnostics No
● for module diagnostics Yes; green/red DIAG LED

Potential separation channels

● between the channels No
● between the channels and backplane bus Yes
● Between the channels and load voltage L+ No

Isolation

Isolation tested with 707 V DC (type test)

Standards, approvals, certificates

Suitable for safety functions No
Suitable for safety-related tripping of standard modules No

Ecological footprint

● environmental product declaration Yes

Global warming potential

— global warming potential, (total) [CO2 eq] 29.3 kg
— global warming potential, (during production) [CO2 eq] 3.98 kg
— global warming potential, (during operation) [CO2 eq] 25.6 kg
— global warming potential, (after end of life cycle) [CO2 eq] -0.245 kg

Ambient temperature during operation

● horizontal installation, min. -30 °C; < 0 °C as of FS03
● horizontal installation, max. 60 °C
● vertical installation, min. -30 °C; < 0 °C as of FS03
● vertical installation, max. 50 °C

Altitude during operation relating to sea level

● Installation altitude above sea level, max. 5 000 m; restrictions for installation altitudes > 2 000 m, see ET 200SP system manual

Dimensions

Width 15 mm
Height 73 mm
Depth 58 mm

Weights

Weight, approx. 30 g

Classifications

Version Classification
eClass 16
eClass 14
eClass 12
eClass 9.1
eClass 9
eClass 8
eClass 7.1
eClass 6
ETIM 10
ETIM 9
ETIM 8
ETIM 7
IDEA 4
UNSPSC 15

General Product Approval

Miscellaneous Yes
EU declaration of conformity Yes
UK Declaration of Conformity Yes
Manufacturer Declaration Yes
RCM Yes
EAC Yes
China RoHS Yes
EU declaration of conformity Yes
UK Declaration of Conformity Yes

Maritime application

RMRS (Russian Maritime Register) Yes

Environment

EPD Typ II/III (with life cylce assessment) Yes
Siemens EcoTech Profile (SEP) Yes
China RoHS Yes
last modified: 3/10/2026

Applications

This Industrial Automation Component is designed for industrial automation applications, offering reliable performance and compatibility with Siemens automation systems. Suitable for manufacturing, process control, and building automation environments.

Place your order before 14:00 for earliest possible shipment handover. With round-the-clock transit operated by our partnered global logistics providers, parcels reach most international destinations following routine customs processing. Normal delivery takes 2–6 business days subject to customs clearance progress.Shipping fees will be charged for all orders under USD 500, and the exact shipping cost will be determined and collected by our logistics carriers. Shipments to remote international regions will incur additional courier surcharges to offset extra cross-border transportation costs.

Factory warranty service is not applicable to this industrial control equipment, and extended warranty packages are not provided for this item.
★ ★ ★ ★ ★
4.0 / 5 (2 review)