Phoenix Contact · Connection Cable
2833770 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingPlug-in mounting
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Input voltage range |
12 V DC ... 24 V DC |
| Mechanical |
| Weight |
6.47 g |
| Mounting |
Plug-in mounting |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Mounting |
Rated current Ie |
|
2833770 (this page) |
Plug-in mounting |
up to 4 A |
| 2833783 |
Plug-in mounting |
up to 4 A |
| 2806286 |
— |
up to 4 A |
| 2806862 |
DIN rail / panel |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2833770 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides Plug-in mounting support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2833770
Phoenix Contact 2833770 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2833770; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Input voltage range: 12 V DC ... 24 V DC — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP67 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Weight: 6.47 g — Verify it in the project documentation before confirming the order.
- Rated current Ie: up to 4 A — Check this value against the nameplate of the installed unit before ordering.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 2833770
Q.For 2833770, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP67 (IEC 60529) for Phoenix Contact 2833770. Confirm this figure against the unit currently in the panel.
Q.Which value is published under mounting for catalog number 2833770?
For 2833770, mounting is given as Plug-in mounting. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 2833770, which weight entry should be checked?
The weight entry quoted above is 6.47 g. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of 2833770 before ordering?
Match the catalog number 2833770 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 2833770 replace the unit currently installed in my panel?
Compare catalog number 2833770 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.